FAQ

How to apply Skate Patch

1. Clean and dry shoes

Make sure the shoes you're applying Skate Patch to are clean and dry.

2. Apply Glue

Apply the glue in a well ventilated area using the provided non-latex glove and glue spreader. Use the glue spreader to create a thin, even layer of glue the same size as the Skate Patch directly onto the shoe.

Apply a thin, even layer of glue to the under side of the Skate Patch. Spread the glue evenly to the entirety of the Skate Patch.

3. Wait 20 minutes

Wait for 20 minutes for the glue to soak into the shoe and the Skate Patch.

4. Apply Glue Again

Add a second layer of glue to the shoe and Skate Patch.

5. Placing the Skate Patch

Place the Skate Patch onto the shoe where you've already applied the glue.

6. Working the Skate Patch

Evenly press the Skate Patch into the shoes material wall to create a good bond between shoe and Skate Patch.

Start apply firm pressure to the center of the Skate Patch and work your way towards the edges of the Skate Patch.

7. Leave to dry

Once The Skate Patch has been worked onto the shoe leave to dry. The glues bond will be at its strongest after 48 hours.

How long does Skate Patch last?

Skate Patch will add around 35% to 40% more life to your skate shoes. We arrived at this figure by testing the product with local skaters.

Will Skate Patch change how my board feels?

On the contrary! If you weren't looking at your feet you wouldn't even know they where there.

Adhesive

Boterm GTA is a professional one-component neoprene adhesive used in the footwear industry for gluing natural and synthetic leathers with rubber, tuner, styrogum and leather underparts. It is also used in leather-making and as a universal adhesive for gluing, among others leather, fabric, rubber, felt, some types of floor coverings, cork, cardboard, fiberboard between themselves and hard PVC, metals, wood and concrete.

How to Use:

Adhesive and glued materials should be brought to room temperature. Smooth surfaces of joined materials should be scratched and dust should be removed.

Apply the adhesive with a thin layer on both glued surfaces. In case of absorbent materials (eg fabric, leather) apply twice, the second layer after about 20 minutes after the first one. Wait about 15 minutes (until the solvent evaporates completely). In order to increase the strength of the weld, it is recommended to activate the adhesive layer at a temperature of approx. 55 ° C for approx. 3 minutes. Join the elements and iron them for 15 seconds at a pressure of 0.4 - 0.5 MPa. The joint obtains full strength after 3 days from gluing.

Warning: Highly flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May causedrowsiness or dizziness. Suspected of damaging fertility or unborn child. Toxic to aquatic life with long-lasting effects. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in a well ventilated place. keep container tightly closed. Current batch to be used before 06/02/2025.